Suppliers of high-performance

The HSH Incinerator is a controlled air, high temperature two-stage incinerator that will destroy both wet and dry waste in an efficient and environmentally safe manner.

Destruction of both Wet & Dry Waste is controlled by Combustion Air entering through the side walls into the burning chamber, thus eliminating blockages through melting plastics or fats that can occur with air holes through the floor.

The "Controlled Excess Air" design provides operation in both "Starved" and "Excess" air modes in the Primary Chamber during different stages of the burning cycle and always supplies excess air in the secondary chamber.

The large secondary chamber provides a Retention Time of one second or two seconds [if required, with design modifications] at 1000+ degrees Centigrade meaning that exhaust gas is burnt effectively within the chamber ensuring a smokeless gas discharge.

Heating the suspended hearth under the burning chamber with recycled waste heat reduces operating costs by reducing the amount of fuel used.

All HSH models are lined with high quality refractories and insulation (type will depend on customer requirements and environmental conditions for transport and use of the unit)

The HSH has large loading doors for easy loading and ash removal.

The Stainless Steel Stack is air cooled with flue gas temperatures sufficiently high to prevent the formation of dioxins and furans entering the atmosphere.

The HSH Incinerator is supplied with Automatic Air Operation, and Water Spray systems are provided when required.

The accepted "3T's" formula of Time, Temperature and Turbulence is fully addressed in this robust and compact design to satisfy the demands of many Australian and overseas customers on performance as well as meeting environmental requirements.

Our fully integrated control system provides operator safety, reliability and low running costs.

The HSH is ideal for:

• Industrial applications/Mine Sites/Oil
• Biomedical waste
• Plastics, Synthetics
• Commercial trash
• Waste Foodstuffs
• Liquids
• Hydrocarbons and Filters

NSI HSH incinerators have been supplied to customers involved in mining and general industry for the destruction of a wide range of wet and dry combustible waste. Hospitals and councils within Australia and overseas have found the HSH incinerator ideally suited for the destruction of bio-medical and animal carcass waste.

Each HSH incinerator is designed and constructed for specific customer requirements according to the nature and type of waste materials requiring destruction. NSI provide an incineration system that satisfies our customer, providing sound performance and reliability and meeting all relevant environmental requirements.

Environmental compliance and customer satisfaction letters are available on request.

HSH Incinerators are designed and manufactured in Australia.

Further information:

• HSH design performance specification